Rubi Tile Spacer 7mm bag of 100

£4.99 (£4.16 ex. VAT)

SKU: RU02904 Category:

Description

RUBI crossheads form, without a doubt, a truly indispensable range for obtaining perfect finishes in any ceramic tile installation job.

RUBI manufactures joint crossheads with a high-quality base material and, for this reason, they do not have any type of imperfections or burrs.

Crossheads for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tile coverings and floors with minimal joints. The solid structure of the crossheads for 1, 1.5, 2 and 3 mm joints has been designed to provide greater resistance to bending and crushing. These properties make the crossheads for 1, 1.5, 2 and 3 mm joints highly recommended for covering large format ceramic tiles.

The L (long) versions of the 2 and 3 mm crossheads are perfect, both for coverings and for floors with large-format or rectified ceramic tiles, with a fine joint.

The internal geometry of the crossheads for 3 mm long and 4 mm joints has been designed to provide greater resistance to bending and crushing. These properties make the 3 mm long joint crosspieces highly recommended for covering large format ceramic tiles.

The internal geometry of the crossheads for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stress and prevent crushing. This hollow design facilitates the entry of the joint mortar and, if the type of installation allows, leaving the crosshead inside the placement joint without this affecting its integrity in the future.

RUBI’s 5 mm reinforced crossheads are more rigid crossheads, especially designed for use on floors with large format tiles. The underside of the 5 mm reinforced crossheads is designed to offer good seating in the grip material and facilitate, if the type of installation allows, that the crosshead remains inside the installation joint without this affect its integrity in the future.

The professional installer is very aware of the importance of using high quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities.

RUBI crossheads stand out for the regularity of their production, the homogeneity of measurements and the absence of burrs and any other small defects. These particularities allow professionals who trust in RUBI crossheads, Ts and wedges to obtain excellent finishes with total precision.

RUBI is committed to quality. All our products and tools are subjected to rigorous quality examinations by experienced professionals. We want all the products we have on the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to ceramic tile laying and construction professionals.